Single-phase installation of your Porsche Charging Hardware

If you have already purchased your Porsche charging hardware from your preferred Porsche Centre, you can choose Andersen, a recommended installer, to carry out your installation.

Select your installation option

As part of our partnership with Porsche GB, you can choose between a standard installation with virtual home check, or a physical home check.

Remote Home Check + Installation

£499

  • Lead time based on geographical location
  • Once remote home check has been completed it will be reviewed & returned within 5 days

Physical Home Check + Installation

£699

  • Lead time based on geographical location
  • An Andersen electrician will visit you to conduct your home check
  • You will be provided with a report along with quotes for any non-standard work required.

What is included in my Porsche single-phase standard installation?

  • Fitting of a home charging solution on a brick or plaster wall, or to another suitable permanent structure.
  • Fitting of a home charging solution onto a single-phase electrical supply.*
  • Up To 15 meters (50 feet) of cable, run, and neatly clipped to the wall between the electricity supply meter/distribution board and the chosen charging hardware.
  • Routing of the cable through a drilled hole in a wall up to 500 mm (20 inches) thick, if this is needed.
  • The fitting and testing of electrical connections and protections required for the chosen home charge point.
  • Installation of a PME protective device.**
  • Up to 3 meters (10 feet) of plastic conduit to conceal interior wiring.
  • A remote home check carried out online.

Please Note:

  • Porsche standard installation and Andersen standard installation have different criteria.
  • *A 7kW charger can be connected to a three-phase electrical supply.
  • **Load balancing PME protective device may be required once we have surveyed your installation.

What is the difference between a remote home check and a physical home check?

Home Check

  • Complimentary service
  • Complete this via our secure online home check portal
  • You will need to upload images and provide information about your installation site via desktop or mobile
  • Then the information is reviewed by our in-house engineers remotely
  • They will confirm whether your installation falls within our standard or non-standard terms
  • Results of your home check are emailed to you.
  • If you come under non-standard, this will include a quote for the works needed
  • Please allow up to 10 working days for our engineers to provide a final result
  • If you require a non-standard installation and do not wish to proceed with the quote, a full refund will be given.

Physical Check

  • Book one of our trusted engineers to visit your installation site at a time that is suitable for you (1-week notice required)
  • The engineer will spend between 1-2 hours on site
  • They will need to look at your meter, supply fuse and fuse board(s) so may require access to the inside of your property
  • They will listen and offer expert advice to find the most suitable solution for you
  • They will confirm whether your installation falls within our standard or non-standard terms
  • Results of your home check are emailed to you
  • If you come under non-standard, this will include a quote for the works needed
  • Please allow up to 10 working days for our engineers to provide a final result
  • If you require a non-standard installation and do not wish to proceed with the quote, a full refund will be given on the charge point and installation only

What if I don’t come under standard installation?

If you think you require a non-standard Porsche installation, please contact our installation team at:
helpdesk@andersen-ev.com

Purchase of the Porsche charging hardware is through your Porsche centre

FAQ for Porsche Owners

Need further help?Call us on 01234 916125